[nflug] Kubuntu on Toshiba Notebook
Joe
josephj at main.nc.us
Sat Aug 12 03:22:55 EDT 2006
Hi. I've tested most things out in the store using the kubuntu Dapper
Drake CD.
It looks like things are good but there are still a few things in the
system log that don't look right.
I'd really appreciate it if any of you could review this and let me know
if anything looks wrong.
I apologize for the long post. I'm not sure what you might need to see.
I'm looking at two notebooks, an HP and a Toshiba. This email is about
the Toshiba.
TIA
Joe
Toshiba dmesg output:
Stuff that looks "wrong" before the whole log is listed below:
---
[4294667.296000] Processor #1 6:14 APIC version 20
[4294667.296000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
---
[4294668.156000] pnp: PnP ACPI: found 12 devices
[4294668.156000] PnPBIOS: Disabled by ACPI PNP
[4294668.156000] PCI: Using ACPI for IRQ routing
[4294668.156000] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
[4294668.171000] pnp: 00:08: ioport range 0x1e0-0x1ef has been reserved
[4294668.171000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294668.171000] PCI: Bridge: 0000:00:1c.0
[4294668.171000] IO window: disabled.
[4294668.171000] MEM window: disabled.
[4294668.171000] PREFETCH window: disabled.
[4294668.171000] PCI: Bridge: 0000:00:1c.2
[4294668.171000] IO window: disabled.
[4294668.171000] MEM window: ffc00000-ffcfffff
[4294668.171000] PREFETCH window: disabled.
---
[4294670.374000] APIC error on CPU0: 00(40)
[4294670.668000] ata2: dev 0 cfg 00:85c0 49:0f00 82:0000 83:0000 84:0000
85:0000 86:0000 87:0000 88:0407 93:4000
---
[4294682.761000] APIC error on CPU0: 40(40)
[4294683.105000] APIC error on CPU0: 40(40)
[4294684.559000] APIC error on CPU0: 40(40)
[4294685.123000] APIC error on CPU0: 40(40)
[4294690.449000] APIC error on CPU0: 40(40)
[4294691.852000] APIC error on CPU0: 40(40)
[4294698.241000] APIC error on CPU0: 40(40)
[4294698.596000] APIC error on CPU0: 40(40)
[4294698.848000] APIC error on CPU0: 40(40)
[4294699.937000] APIC error on CPU0: 40(40)
[4294700.970000] APIC error on CPU0: 40(40)
[4294702.439000] APIC error on CPU0: 40(40)
[4294703.168000] APIC error on CPU0: 40(40)
[4294705.630000] APIC error on CPU0: 40(40)
[4294710.621000] APIC error on CPU0: 40(40)
---
[4294711.939000] APIC error on CPU0: 40(40)
[4294720.234000] APIC error on CPU0: 40(40)
---
[4294730.730000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel at redhat.com
[4294733.420000] Assertion failed! qc->n_elem >
0,drivers/scsi/libata-core.c,ata_fill_sg,line=2531
[4294735.470000] APIC error on CPU0: 40(40)
[4294736.082000] APIC error on CPU0: 40(40)
This error keeps occurring throughout the log
---
Full Toshiba dmesg:
[4294667.296000] Linux version 2.6.15-23-386 (buildd at rothera) (gcc
version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40
UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[4294667.296000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[4294667.296000] BIOS-e820: 000000003f7a0000 - 000000003f7b0000 (ACPI data)
[4294667.296000] BIOS-e820: 000000003f7b0000 - 0000000040000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec18000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec20000 - 00000000fec28000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[4294667.296000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[4294667.296000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[4294667.296000] 119MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 260000
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 30624 pages, LIFO batch:7
[4294667.296000] DMI 2.4 present.
[4294667.296000] ACPI: RSDP (v000 TOSHIB
) @ 0x000f01e0
[4294667.296000] ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM
0x04010000) @ 0x3f7a0000
[4294667.296000] ACPI: FADT (v002 TOSHIB 750 0x20030101 TASM
0x04010000) @ 0x3f7a0068
[4294667.296000] ACPI: SSDT (v001 TOSHIB A0044 0x20050926 MSFT
0x0100000e) @ 0x3f7a511c
[4294667.296000] ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM
0x04010000) @ 0x3f7a0040
[4294667.296000] ACPI: MADT (v001 TOSHIB 750 0x00970814 TASM
0x04010000) @ 0x3f7a5cd4
[4294667.296000] ACPI: MCFG (v001 TOSHIB 750 0x00970814 TASM
0x04010000) @ 0x3f7a5d3c
[4294667.296000] ACPI: HPET (v001 TOSHIB 750 0x00970814 TASM
0x04010000) @ 0x3f7a5dac
[4294667.296000] ACPI: DSDT (v001 TOSHIB A0044 0x20060301 MSFT
0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0xd808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:14 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 6:14 APIC version 20
[4294667.296000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1 already used, trying 2
[4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000,
GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz
preseed/file=/cdrom/preseed/kubuntu.seed boot=casper
initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet
splash --
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Console: colour VGA+ 80x25
[4294667.296000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
[4294667.296000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[4294667.296000] Memory: 1020176k/1040000k available (1976k kernel code,
19092k reserved, 606k data, 288k init, 122496k highmem)
[4294667.296000] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[4294667.296000] hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2,
8, 0
[4294667.296000] hpet0: 3 64-bit timers, 14318180 Hz
[4294667.296000] Using HPET for base-timer
[4294667.296000] Using HPET for gettimeofday
[4294667.296000] Detected 1662.709 MHz processor.
[4294667.296000] Using hpet for high-res timesource
[4294667.357000] Calibrating delay using timer specific routine..
3328.09 BogoMIPS (lpj=1664048)
[4294667.357000] Security Framework v1.0.0 initialized
[4294667.357000] SELinux: Disabled at boot.
[4294667.357000] Mount-cache hash table entries: 512
[4294667.357000] CPU: After generic identify, caps: bfe9fbff 00000000
00000000 00000000 0000c189 00000000 00000000
[4294667.357000] CPU: After vendor identify, caps: bfe9fbff 00000000
00000000 00000000 0000c189 00000000 00000000
[4294667.357000] monitor/mwait feature present.
[4294667.357000] using mwait in idle threads.
[4294667.357000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294667.357000] CPU: L2 cache: 2048K
[4294667.357000] CPU: After all inits, caps: bfe9fbff 00000000 00000000
00000040 0000c189 00000000 00000000
[4294667.357000] mtrr: v2.0 (20020519)
[4294667.357000] CPU: Intel Genuine Intel(R) CPU T2300 @
1.66GHz stepping 08
[4294667.357000] Enabling fast FPU save and restore... done.
[4294667.357000] Enabling unmasked SIMD FPU exception support... done.
[4294667.357000] Checking 'hlt' instruction... OK.
[4294667.361000] checking if image is initramfs... it is
[4294668.019000] Freeing initrd memory: 6836k freed
[4294668.023000] ACPI: Looking for DSDT ... not found!
[4294668.026000] ENABLING IO-APIC IRQs
[4294668.026000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294668.139000] NET: Registered protocol family 16
[4294668.139000] EISA bus registered
[4294668.139000] ACPI: bus type pci registered
[4294668.139000] PCI: PCI BIOS revision 2.10 entry at 0xfd27d, last bus=4
[4294668.139000] PCI: Using MMCONFIG
[4294668.139000] ACPI: Subsystem revision 20051216
[4294668.142000] ACPI: Interpreter enabled
[4294668.142000] ACPI: Using IOAPIC for interrupt routing
[4294668.142000] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[4294668.143000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
[4294668.143000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
[4294668.143000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
[4294668.144000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
[4294668.144000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
[4294668.144000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
[4294668.145000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
[4294668.145000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.145000] PCI: Probing PCI hardware (bus 00)
[4294668.146000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294668.146000] Boot video device is 0000:00:02.0
[4294668.147000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[4294668.148000] PCI: Transparent bridge - 0000:00:1e.0
[4294668.148000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.150000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[4294668.152000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[4294668.152000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MPEX._PRT]
[4294668.152000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.152000] pnp: PnP ACPI init
[4294668.156000] pnp: PnP ACPI: found 12 devices
[4294668.156000] PnPBIOS: Disabled by ACPI PNP
[4294668.156000] PCI: Using ACPI for IRQ routing
[4294668.156000] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
[4294668.171000] pnp: 00:08: ioport range 0x1e0-0x1ef has been reserved
[4294668.171000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294668.171000] PCI: Bridge: 0000:00:1c.0
[4294668.171000] IO window: disabled.
[4294668.171000] MEM window: disabled.
[4294668.171000] PREFETCH window: disabled.
[4294668.171000] PCI: Bridge: 0000:00:1c.2
[4294668.171000] IO window: disabled.
[4294668.171000] MEM window: ffc00000-ffcfffff
[4294668.171000] PREFETCH window: disabled.
[4294668.171000] PCI: Bus 4, cardbus bridge: 0000:03:0b.0
[4294668.171000] IO window: 0000b000-0000b0ff
[4294668.171000] IO window: 0000b400-0000b4ff
[4294668.171000] PREFETCH window: 50000000-51ffffff
[4294668.171000] MEM window: 54000000-55ffffff
[4294668.171000] PCI: Bridge: 0000:00:1e.0
[4294668.171000] IO window: b000-bfff
[4294668.171000] MEM window: ffa00000-ffafffff
[4294668.171000] PREFETCH window: 50000000-51ffffff
[4294668.171000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level,
low) -> IRQ 169
[4294668.171000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294668.171000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level,
low) -> IRQ 177
[4294668.171000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4294668.171000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294668.171000] PCI: Enabling device 0000:03:0b.0 (0000 -> 0003)
[4294668.171000] ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 21 (level,
low) -> IRQ 185
[4294668.171000] Simple Boot Flag at 0x7c set to 0x1
[4294668.172000] audit: initializing netlink socket (disabled)
[4294668.172000] audit(1155368572.171:1): initialized
[4294668.172000] highmem bounce pool size: 64 pages
[4294668.172000] VFS: Disk quotas dquot_6.5.1
[4294668.172000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.172000] Initializing Cryptographic API
[4294668.172000] io scheduler noop registered
[4294668.172000] io scheduler anticipatory registered
[4294668.172000] io scheduler deadline registered
[4294668.172000] io scheduler cfq registered
[4294668.172000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level,
low) -> IRQ 169
[4294668.172000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294668.172000] assign_interrupt_mode Found MSI capability
[4294668.172000] Allocate Port Service[pcie00]
[4294668.172000] Allocate Port Service[pcie03]
[4294668.172000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level,
low) -> IRQ 177
[4294668.172000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4294668.172000] assign_interrupt_mode Found MSI capability
[4294668.172000] Allocate Port Service[pcie00]
[4294668.172000] Allocate Port Service[pcie03]
[4294668.172000] isapnp: Scanning for PnP cards...
[4294668.532000] isapnp: No Plug & Play device found
[4294668.543000] hpet_resources: 0xfed00000 is busy
[4294668.544000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[4294668.547000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.548000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.548000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports,
IRQ sharing enabled
[4294668.550000] RAMDISK driver initialized: 16 RAM disks of 1048576K
size 1024 blocksize
[4294668.550000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294668.550000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[4294668.550000] mice: PS/2 mouse device common for all mice
[4294668.550000] EISA: Probing bus 0 at eisa.0
[4294668.550000] EISA: Detected 0 cards.
[4294668.550000] NET: Registered protocol family 2
[4294668.559000] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[4294668.559000] TCP established hash table entries: 131072 (order: 7,
524288 bytes)
[4294668.559000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.559000] TCP: Hash tables configured (established 131072 bind 65536)
[4294668.559000] TCP reno registered
[4294668.559000] TCP bic registered
[4294668.559000] NET: Registered protocol family 1
[4294668.559000] NET: Registered protocol family 8
[4294668.559000] NET: Registered protocol family 20
[4294668.559000] Using IPI Shortcut mode
[4294668.560000] ACPI wakeup devices:
[4294668.560000] LAN USB1 USB3 USB4 EHCI AZAL GLAN LID PWRB
[4294668.560000] ACPI: (supports S0 S3 S4 S5)
[4294668.560000] Freeing unused kernel memory: 288k freed
[4294668.577000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294668.604000] vga16fb: initializing
[4294668.604000] vga16fb: mapped to 0xc00a0000
[4294668.715000] Console: switching to colour frame buffer device 80x25
[4294668.715000] fb0: VGA16 VGA frame buffer device
[4294669.797000] Capability LSM initialized
[4294669.826000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294669.827000] ACPI: Thermal Zone [THRM] (56 C)
[4294670.202000] SCSI subsystem initialized
[4294670.203000] ACPI: bus type scsi registered
[4294670.203000] libata version 1.20 loaded.
[4294670.204000] ata_piix 0000:00:1f.2: version 1.05
[4294670.204000] ata_pci_init_one: pci_dev class+intf: 0x10180
[4294670.204000] ata_pci_init_one: NO_LEGACY == 0
[4294670.204000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level,
low) -> IRQ 217
[4294670.204000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294670.204000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma
0xAFA0 irq 14
[4294670.358000] ata1: dev 0 cfg 00:0040 49:2f00 82:746b 83:7d09 84:6023
85:7469 86:3c09 87:6023 88:203f 93:0000
[4294670.358000] ata1: dev 0 ATA-6, max UDMA/100, 194980905 sectors: LBA48
[4294670.358000] ata_acpi_push_id: skipping for PATA mode
[4294670.358000] ata1: dev 0 configured for UDMA/100
[4294670.358000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.358000] pata_get_dev_handle: dev_handle: 0xdfffbd60,
parent_handle: 0xdfff79e0
[4294670.358000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002,
parent=0xdff83a00, *handle=0xdfffbd60
[4294670.358000] do_drive_get_GTF: drive w/ adr=0: v: 0xdfff6880
[4294670.359000] scsi0 : ata_piix
[4294670.359000] Vendor: ATA Model: TOSHIBA MK1032GS Rev: AS02
[4294670.359000] Type: Direct-Access ANSI SCSI
revision: 05
[4294670.359000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.359000] pata_get_dev_handle: dev_handle: 0xdfffbd60,
parent_handle: 0xdfff79e0
[4294670.359000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002,
parent=0xdff83a00, *handle=0xdfffbd60
[4294670.359000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma
0xAFA8 irq 15
[4294670.374000] APIC error on CPU0: 00(40)
[4294670.668000] ata2: dev 0 cfg 00:85c0 49:0f00 82:0000 83:0000 84:0000
85:0000 86:0000 87:0000 88:0407 93:4000
[4294670.668000] ata2: dev 0 ATAPI, max UDMA/33
[4294670.668000] ata2(0): applying bridge limits
[4294670.668000] ata_acpi_push_id: skipping for PATA mode
[4294670.668000] ata2: dev 0 configured for UDMA/33
[4294670.668000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.668000] pata_get_dev_handle: dev_handle: 0xdfffbd60,
parent_handle: 0xdfff79e0
[4294670.668000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002,
parent=0xdff83a00, *handle=0xdfffbd60
[4294670.668000] do_drive_get_GTF: drive w/ adr=0: v: 0xdfff6740
[4294670.669000] scsi1 : ata_piix
[4294670.671000] Vendor: MATSHITA Model: DVD-RAM UJ-842S Rev: 1.01
[4294670.671000] Type: CD-ROM ANSI SCSI
revision: 05
[4294670.671000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.671000] pata_get_dev_handle: dev_handle: 0xdfffbd60,
parent_handle: 0xdfff79e0
[4294670.671000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002,
parent=0xdff83a00, *handle=0xdfffbd60
[4294670.679000] Driver 'sd' needs updating - please use bus_type methods
[4294670.684000] SCSI device sda: 194980905 512-byte hdwr sectors (99830 MB)
[4294670.684000] SCSI device sda: drive cache: write back
[4294670.686000] SCSI device sda: 194980905 512-byte hdwr sectors (99830 MB)
[4294670.686000] SCSI device sda: drive cache: write back
[4294670.686000] sda: sda1
[4294671.026000] sd 0:0:0:0: Attached scsi disk sda
[4294671.042000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[4294671.042000] Uniform CD-ROM driver Revision: 3.20
[4294671.043000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294671.193000] ieee1394: Initialized config rom entry `ip1394'
[4294671.194000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins at debian.org>
[4294671.194000] PCI: Enabling device 0000:03:0b.1 (0000 -> 0002)
[4294671.194000] ACPI: PCI Interrupt 0000:03:0b.1[B] -> GSI 20 (level,
low) -> IRQ 225
[4294671.230000] usbcore: registered new driver usbfs
[4294671.231000] usbcore: registered new driver hub
[4294671.231000] USB Universal Host Controller Interface driver v2.3
[4294671.231000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level,
low) -> IRQ 233
[4294671.231000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294671.231000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294671.232000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[4294671.232000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000cf80
[4294671.232000] hub 1-0:1.0: USB hub found
[4294671.232000] hub 1-0:1.0: 2 ports detected
[4294671.246000] APIC error on CPU0: 40(40)
[4294671.290000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[225]
MMIO=[ffa06000-ffa067ff] Max Packet=[2048]
[4294671.333000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
low) -> IRQ 217
[4294671.333000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294671.333000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294671.333000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[4294671.333000] uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000cf60
[4294671.333000] hub 2-0:1.0: USB hub found
[4294671.333000] hub 2-0:1.0: 2 ports detected
[4294671.351000] APIC error on CPU0: 40(40)
[4294671.434000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
low) -> IRQ 177
[4294671.434000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294671.434000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294671.434000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[4294671.434000] uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000cf40
[4294671.434000] hub 3-0:1.0: USB hub found
[4294671.434000] hub 3-0:1.0: 2 ports detected
[4294671.535000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level,
low) -> IRQ 50
[4294671.535000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294671.535000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294671.535000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[4294671.535000] uhci_hcd 0000:00:1d.3: irq 50, io base 0x0000cf20
[4294671.535000] hub 4-0:1.0: USB hub found
[4294671.535000] hub 4-0:1.0: 2 ports detected
[4294671.539000] usb 1-1: new full speed USB device using uhci_hcd and
address 2
[4294671.637000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level,
low) -> IRQ 233
[4294671.637000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294671.637000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294671.638000] ehci_hcd 0000:00:1d.7: debug port 1
[4294671.638000] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[4294671.638000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[4294671.638000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xffd3fc00
[4294671.642000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[4294671.642000] hub 5-0:1.0: USB hub found
[4294671.642000] hub 5-0:1.0: 8 ports detected
[4294671.766000] ide0: I/O resource 0x1F0-0x1F7 not free.
[4294671.766000] ide0: ports already in use, skipping probe
[4294671.766000] ide1: I/O resource 0x170-0x177 not free.
[4294671.766000] ide1: ports already in use, skipping probe
[4294672.054000] usb 1-1: device not accepting address 2, error -71
[4294672.415000] usb 5-1: new high speed USB device using ehci_hcd and
address 2
[4294672.539000] Initializing USB Mass Storage driver...
[4294672.546000] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0000390000ae1fd7]
[4294672.685000] scsi2 : SCSI emulation for USB Mass Storage devices
[4294672.685000] usb-storage: device found at 2
[4294672.685000] usb-storage: waiting for device to settle before scanning
[4294672.685000] usbcore: registered new driver usb-storage
[4294672.685000] USB Mass Storage support registered.
[4294672.857000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294672.913000] ISO 9660 Extensions: RRIP_1991A
[4294672.961000] loop: loaded (max 8 devices)
[4294672.969000] Registering unionfs 1.1.2
[4294673.050000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[4294673.140000] usb 2-1: new full speed USB device using uhci_hcd and
address 2
[4294677.685000] Vendor: I0MEGA Model: Mini256MB*IOM2D5 Rev: 2.00
[4294677.685000] Type: Direct-Access ANSI SCSI
revision: 00
[4294677.687000] SCSI device sdb: 504832 512-byte hdwr sectors (258 MB)
[4294677.687000] sdb: Write Protect is off
[4294677.687000] sdb: Mode Sense: 0b 00 00 00
[4294677.687000] sdb: assuming drive cache: write through
[4294677.690000] SCSI device sdb: 504832 512-byte hdwr sectors (258 MB)
[4294677.690000] sdb: Write Protect is off
[4294677.690000] sdb: Mode Sense: 0b 00 00 00
[4294677.690000] sdb: assuming drive cache: write through
[4294677.690000] sdb: sdb1
[4294677.691000] sd 2:0:0:0: Attached scsi removable disk sdb
[4294677.691000] usb-storage: device scan complete
[4294682.761000] APIC error on CPU0: 40(40)
[4294683.105000] APIC error on CPU0: 40(40)
[4294684.559000] APIC error on CPU0: 40(40)
[4294685.123000] APIC error on CPU0: 40(40)
[4294690.449000] APIC error on CPU0: 40(40)
[4294691.852000] APIC error on CPU0: 40(40)
[4294698.241000] APIC error on CPU0: 40(40)
[4294698.596000] APIC error on CPU0: 40(40)
[4294698.848000] APIC error on CPU0: 40(40)
[4294699.937000] APIC error on CPU0: 40(40)
[4294700.970000] APIC error on CPU0: 40(40)
[4294702.439000] APIC error on CPU0: 40(40)
[4294703.168000] APIC error on CPU0: 40(40)
[4294705.630000] APIC error on CPU0: 40(40)
[4294710.621000] APIC error on CPU0: 40(40)
[4294710.917000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
[4294710.917000] e100: Copyright(c) 1999-2005 Intel Corporation
[4294710.917000] ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 20 (level,
low) -> IRQ 225
[4294710.952000] e100: eth0: e100_probe: addr 0xffaff000, irq 225, MAC
addr 00:0E:7B:43:77:F2
[4294711.939000] APIC error on CPU0: 40(40)
[4294720.234000] APIC error on CPU0: 40(40)
[4294722.256000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294722.256000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[4294722.257000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[4294722.620000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294722.752000] Linux agpgart interface v0.101 (c) Dave Jones
[4294723.555000] hw_random: RNG not detected
[4294723.590000] APIC error on CPU0: 40(40)
[4294723.759000] agpgart: Detected an Intel 945GM Chipset.
[4294723.759000] agpgart: Detected 7932K stolen memory.
[4294723.796000] agpgart: AGP aperture is 256M @ 0xe0000000
[4294723.830000] APIC error on CPU0: 40(40)
[4294723.931000] input: PS/2 Mouse as /class/input/input1
[4294723.946000] Real Time Clock Driver v1.12
[4294723.961000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
[4294724.217000] shpchp: Standard Hot Plug PCI Controller Driver
version: 0.4
[4294724.517000] NET: Registered protocol family 17
[4294724.809000] input: PC Speaker as /class/input/input3
[4294724.823000] ts: Compaq touchscreen protocol output
[4294725.207000] APIC error on CPU0: 40(40)
[4294725.292000] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
[4294725.292000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level,
low) -> IRQ 58
[4294725.292000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4294725.409000] ieee80211_1_1_13_crypt: registered algorithm 'NULL'
[4294725.410000] ieee80211_1_1_13: 802.11 data/management/control stack,
1.1.13
[4294725.410000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel
Corporation <jketreno at linux.intel.com>
[4294725.498000] ieee80211_crypt: registered algorithm 'NULL'
[4294725.547000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294725.547000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno at linux.intel.com>
[4294725.654000] ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 21 (level,
low) -> IRQ 185
[4294725.654000] Yenta: CardBus bridge found at 0000:03:0b.0 [1179:0001]
[4294725.655000] Yenta: Enabling burst memory read transactions
[4294725.655000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294725.655000] Yenta: Routing CardBus interrupts to PCI
[4294725.655000] Yenta TI: socket 0000:03:0b.0, mfunc 0x01aa1022, devctl
0x64
[4294725.878000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 185
[4294725.878000] Socket status: 30000006
[4294725.878000] Yenta: Raising subordinate bus# of parent bus (#03)
from #04 to #07
[4294725.878000] pcmcia: parent PCI bridge I/O window: 0xb000 - 0xbfff
[4294725.878000] cs: IO port probe 0xb000-0xbfff: clean.
[4294725.878000] pcmcia: parent PCI bridge Memory window: 0xffa00000 -
0xffafffff
[4294725.878000] pcmcia: parent PCI bridge Memory window: 0x50000000 -
0x51ffffff
[4294726.150000] sdhci: Secure Digital Host Controller Interface driver,
0.10
[4294726.150000] sdhci: Copyright(c) Pierre Ossman
[4294726.151000] PCI: Enabling device 0000:03:0b.3 (0000 -> 0002)
[4294726.151000] ACPI: PCI Interrupt 0000:03:0b.3[D] -> GSI 23 (level,
low) -> IRQ 233
[4294726.220000] sdhci: ============== REGISTER DUMP ==============
[4294726.220000] sdhci: Sys addr: 0x00000000 | Version: 0x00008900
[4294726.220000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[4294726.220000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294726.220000] sdhci: Present: 0x000a0000 | Host ctl: 0x00000000
[4294726.220000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[4294726.220000] sdhci: Walk up: 0x00000000 | Clock: 0x00000000
[4294726.220000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[4294726.220000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294726.220000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294726.220000] sdhci: Caps: 0x01c030b0 | Max curr: 0x00000000
[4294726.220000] sdhci: ===========================================
[4294726.271000] mmc0: SDHCI at 0xffa06800 irq 233 DMA
[4294726.417000] APIC error on CPU0: 40(40)
[4294726.579000] APIC error on CPU0: 40(40)
[4294727.665000] APIC error on CPU0: 40(40)
[4294727.690000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection
driver for Linux, 1.0.3m
[4294727.690000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[4294727.690000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level,
low) -> IRQ 177
[4294727.690000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[4294727.690000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network
Connection
[4294727.962000] APIC error on CPU0: 40(40)
[4294728.052000] cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
[4294728.054000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7
0x4d0-0x4d7
[4294728.055000] cs: IO port probe 0x820-0x8ff: clean.
[4294728.055000] cs: IO port probe 0xc00-0xcf7: clean.
[4294728.056000] cs: IO port probe 0xa00-0xaff: clean.
[4294728.942000] ipw3945: Detected geography ABG (11 802.11bg channels,
13 802.11a channels)
[4294730.326000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294730.326000] md: bitmap version 4.39
[4294730.730000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel at redhat.com
[4294733.420000] Assertion failed! qc->n_elem >
0,drivers/scsi/libata-core.c,ata_fill_sg,line=2531
[4294735.470000] APIC error on CPU0: 40(40)
[4294736.082000] APIC error on CPU0: 40(40)
[4294743.713000] ACPI: AC Adapter [ADP1] (on-line)
[4294743.821000] ACPI: Battery Slot [BAT1] (battery present)
[4294743.872000] ACPI: Power Button (FF) [PWRF]
[4294743.872000] ACPI: Lid Switch [LID]
[4294743.872000] ACPI: Power Button (CM) [PWRB]
[4294743.954000] APIC error on CPU0: 40(40)
[4294743.957000] ibm_acpi: ec object not found
[4294743.978000] pcc_acpi: loading...
[4294744.034000] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19a-dev
[4294744.034000] toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
[4294744.036000] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
[4294744.036000] toshiba_acpi: ktoshkeyd will check 2 times per second
[4294744.036000] toshiba_acpi: Dropped 0 keys from the queue on startup
[4294744.053000] ACPI: Video Device [VGA] (multi-head: yes rom: yes
post: no)
[4294744.464000] APIC error on CPU0: 40(40)
[4294751.917000] lp: driver loaded but no devices found
[4294752.131000] ppdev: user-space parallel port driver
[4294753.531000] apm: BIOS not found.
[4294756.725000] APIC error on CPU0: 40(40)
[4294758.938000] Bluetooth: Core ver 2.8
[4294758.938000] NET: Registered protocol family 31
[4294758.938000] Bluetooth: HCI device and connection manager initialized
[4294758.938000] Bluetooth: HCI socket layer initialized
[4294759.139000] Bluetooth: L2CAP ver 2.8
[4294759.139000] Bluetooth: L2CAP socket layer initialized
[4294759.154000] Bluetooth: RFCOMM socket layer initialized
[4294759.154000] Bluetooth: RFCOMM TTY layer initialized
[4294759.154000] Bluetooth: RFCOMM ver 1.7
[4294762.440000] [drm] Initialized drm 1.0.1 20051102
[4294762.646000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level,
low) -> IRQ 50
[4294762.646000] [drm] Initialized i915 1.4.0 20060119 on minor 0
[4294764.694000] APIC error on CPU0: 40(40)
[4294765.165000] APIC error on CPU0: 40(40)
[4294767.135000] APIC error on CPU0: 40(40)
[4294767.399000] APIC error on CPU0: 40(40)
[4294767.532000] APIC error on CPU0: 40(40)
[4294903.770000] usb 5-1: USB disconnect, address 2
[4294915.726000] usb 5-1: new high speed USB device using ehci_hcd and
address 4
[4294915.841000] scsi3 : SCSI emulation for USB Mass Storage devices
[4294915.841000] usb-storage: device found at 4
[4294915.841000] usb-storage: waiting for device to settle before scanning
[4294920.841000] Vendor: I0MEGA Model: Mini256MB*IOM2D5 Rev: 2.00
[4294920.841000] Type: Direct-Access ANSI SCSI
revision: 00
[4294920.843000] SCSI device sdc: 504832 512-byte hdwr sectors (258 MB)
[4294920.844000] sdc: Write Protect is off
[4294920.844000] sdc: Mode Sense: 0b 00 00 00
[4294920.844000] sdc: assuming drive cache: write through
[4294920.846000] SCSI device sdc: 504832 512-byte hdwr sectors (258 MB)
[4294920.847000] sdc: Write Protect is off
[4294920.847000] sdc: Mode Sense: 0b 00 00 00
[4294920.847000] sdc: assuming drive cache: write through
[4294920.847000] sdc: sdc1
[4294920.847000] sd 3:0:0:0: Attached scsi removable disk sdc
[4294920.847000] sd 3:0:0:0: Attached scsi generic sg2 type 0
[4294920.848000] usb-storage: device scan complete
[4294937.385000] UDF-fs: No partition found (1)
[4294937.411000] UDF-fs: No partition found (1)
[4294937.516000] Unable to identify CD-ROM format.
[4294937.568000] Unable to identify CD-ROM format.
[4294937.759000] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
_______________________________________________
nflug mailing list
nflug at nflug.org
http://www.nflug.org/mailman/listinfo/nflug
More information about the nflug
mailing list