[nflug] I can't seem to burn cds

[Adam Laurich]

"cdrecord: Warning: Running on Linux-2.6.15-1-686"
this may be it, it may be incompatible with your kernel, my $0.02

On 8/10/06, JJ Neff <jjneff at yahoo.com> wrote:
>
> I can't seem to write a CD at all!  I can write DVDs without issue in my
> plextor dvdburner.  But writing cds is out of the question.  Even on the
> external CD burner (USB) I used to be able to get working:
>
> Debian testing
> Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005
> Joerg Schilling
>
> cdrdao scanbus:
> jjneff at elrey:~$ cdrdao scanbus
> Cdrdao version 1.2.1 - (C) Andreas Mueller <andreas at daneb.de>
>   SCSI interface library - (C) Joerg Schilling
>   Paranoia DAE library - (C) Monty
>
> Check http://cdrdao.sourceforge.net/drives.html#dt for current driver
> tables.
>
> Using libscg version 'schily-0.8'
>
> 0,0,0 : MiniRW  , CD-R/RW 6X4X24  , C.JN
> ATA:1,0,0            PLEXTOR , DVDR   PX-716A  , 1.09
> ATA:1,1,0            SAMSUNG , DVD-ROM SD-616Q , F401
>
> cdrecord scanbus
> jjneff at elrey:~$ cdrecord dev=ATAPI: scanbus
> cdrecord: No write mode specified.
> cdrecord: Asuming -tao mode.
> cdrecord: Future versions of cdrecord may have different drive dependent
> defaults.
> cdrecord: Continuing in 5 seconds...
> Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005
> Joerg Schilling
> NOTE: this version of cdrecord is an inofficial (modified) release of
> cdrecord
>       and thus may have bugs that are not present in the original version.
>       Please send bug reports and support requests to <
> cdrtools at packages.debian.org>.
>       The original author should not be bothered with problems of this
> version.
>
> cdrecord: Warning: Running on Linux-2.6.15-1-686
> cdrecord: There are unsettled issues with Linux-2.5 and newer.
> cdrecord: If you have unexpected problems, please try Linux-2.4 or
> Solaris.
> scsidev: 'ATAPI:'
> devname: 'ATAPI'
> scsibus: -1 target: -1 lun: -1
> Warning: Using ATA Packet interface.
> Warning: The related Linux kernel interface code seems to be unmaintained.
> Warning: There is absolutely NO DMA, operations thus are slow.
> cdrecord: ERROR: unknow subsystem (scd0) in (/dev/sr0)
> Using libscg version 'debian-0.8debian2'.
> cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2'@(#)scsitransp.c
> 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
> cdrecord: Cannot do inquiry for CD/DVD-Recorder.
> cdrecord: Input/output error. test unit ready: scsi sendcmd: fatal error
> CDB:  00 E0 00 00 00 00
> cmd finished after 0.000s timeout 40s
>
> #######################################################
> Some Commands and their output...
>
> sudo cdrdao write --device ATAPI:0,0,0 --driver generic-mmc-raw --speed 12
> file.cue
> Password:
> Cdrdao version 1.2.1 - (C) Andreas Mueller <andreas at daneb.de>
>   SCSI interface library - (C) Joerg Schilling
>   Paranoia DAE library - (C) Monty
>
> Check http://cdrdao.sourceforge.net/drives.html#dt for current driver
> tables.
>
> Using libscg version 'schily-0.8'
>
> ATAPI:0,0,0: PLEXTOR DVDR   PX-716A     Rev: 1.09
> Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options
> 0x0000)
>
> cdrdao: Input/output error.  : scsi sendcmd: no error
> CDB:  00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 09 01 00 00 00 00
> Sense Key: 0x4 Hardware Error, Segment 0
> Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 20s
> ERROR: Cannot setup device ATAPI:0,0,0.
> ###############################################################
> sudo cdrdao write --device 0,0,0 --driver generic-mmc-raw --speed 12
> file.cue
> Cdrdao version 1.2.1 - (C) Andreas Mueller <andreas at daneb.de>
>   SCSI interface library - (C) Joerg Schilling
>   Paranoia DAE library - (C) Monty
>
> Check http://cdrdao.sourceforge.net/drives.html#dt for current driver
> tables.
>
> Using libscg version 'schily-0.8'
>
> 0,0,0: MiniRW CD-R/RW 6X4X24    Rev: C.JN
> Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options
> 0x0000)
>
> WARNING: Unit not ready, still trying...
> WARNING: Unit not ready, still trying...
> WARNING: Unit not ready, still trying...
> WARNING: Unit not ready, still trying...
> WARNING: Unit not ready, still trying...
> WARNING: Unit not ready, still trying...
> WARNING: Unit not ready, still trying...
> WARNING: Unit not ready, still trying...
> WARNING: Unit not ready, still trying...
> WARNING: Unit not ready, still trying...
> ERROR: Unit not ready, giving up.
> ERROR: Cannot setup device 0,0,0.
>
>
>
>
> Any ideas?
>
> JJN
>
>
> _______________________________________________
> nflug mailing list
> nflug at nflug.org
> http://www.nflug.org/mailman/listinfo/nflug
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.nflug.org/pipermail/nflug/attachments/20070525/50013dd6/attachment.html
-------------- next part --------------
_______________________________________________
nflug mailing list
nflug at nflug.org
http://www.nflug.org/mailman/listinfo/nflug