[nflug] I can't seem to burn cds

[JJ Neff]

I can't seem to write a CD at all!  I can write DVDs without issue in my plextor dvdburner.  But writing cds is out of the question.  Even on the external CD burner (USB) I used to be able to get working:

Debian testing
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling

cdrdao scanbus:
jjneff at elrey:~$ cdrdao scanbus
Cdrdao version 1.2.1 - (C) Andreas Mueller <andreas at daneb.de>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

Using libscg version 'schily-0.8'

0,0,0 : MiniRW  , CD-R/RW 6X4X24  , C.JN
ATA:1,0,0            PLEXTOR , DVDR   PX-716A  , 1.09
ATA:1,1,0            SAMSUNG , DVD-ROM SD-616Q , F401

cdrecord scanbus
jjneff at elrey:~$ cdrecord dev=ATAPI: scanbus
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools at packages.debian.org>.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.15-1-686
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: 'ATAPI:'
devname: 'ATAPI'
scsibus: -1 target: -1 lun: -1
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
cdrecord: ERROR: unknow subsystem (scd0) in (/dev/sr0)
Using libscg version 'debian-0.8debian2'.
cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c      1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
cdrecord: Cannot do inquiry for CD/DVD-Recorder.
cdrecord: Input/output error. test unit ready: scsi sendcmd: fatal error
CDB:  00 E0 00 00 00 00
cmd finished after 0.000s timeout 40s

#######################################################
Some Commands and their output...

sudo cdrdao write --device ATAPI:0,0,0 --driver generic-mmc-raw --speed 12 file.cue
Password:
Cdrdao version 1.2.1 - (C) Andreas Mueller <andreas at daneb.de>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

Using libscg version 'schily-0.8'

ATAPI:0,0,0: PLEXTOR DVDR   PX-716A     Rev: 1.09
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 0x0000)

cdrdao: Input/output error.  : scsi sendcmd: no error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 09 01 00 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 20s
ERROR: Cannot setup device ATAPI:0,0,0.
###############################################################
sudo cdrdao write --device 0,0,0 --driver generic-mmc-raw --speed 12 file.cue
 Cdrdao version 1.2.1 - (C) Andreas Mueller <andreas at daneb.de>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

Using libscg version 'schily-0.8'

0,0,0: MiniRW CD-R/RW 6X4X24    Rev: C.JN
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 0x0000)

WARNING: Unit not ready, still trying...
WARNING: Unit not ready, still trying...
WARNING: Unit not ready, still trying...
WARNING: Unit not ready, still trying...
WARNING: Unit not ready, still trying...
WARNING: Unit not ready, still trying...
WARNING: Unit not ready, still trying...
WARNING: Unit not ready, still trying...
WARNING: Unit not ready, still trying...
WARNING: Unit not ready, still trying...
ERROR: Unit not ready, giving up.
ERROR: Cannot setup device 0,0,0.




Any ideas?

JJN


_______________________________________________
nflug mailing list
nflug at nflug.org
http://www.nflug.org/mailman/listinfo/nflug