[nflug] Configuring VoIP with Router/modem

[joshj at linuxmail.org]

Thus spake Joe on Wed, 10 May 2006

> I have a Westell 327W DSL modem/router and a Sunrocket (Innomedia 
> MTA6328-2Re) VoIP box.  My DSL is 860/156 nominal.  Right now, I have only 1 
> PC connected by ethernet, but later, I may have one or more additional ones 
> either ethernet or wireless.
>
> Since my bandwidth is relatively low, I would like to tell the Westell to 
> give top priority to the VoIP (currently on Port 2) and lower priority to 
> everything else (now, just the PC on Port 1).  Is there a way to do that? 
> The router has a lot of options, but I don't understand most of them.  What 
> should I look for?
>
> Sunrocket just says to connect the VoIP between the modem and the PC.  That 
> will work fine, for one PC, but not if I add anything to the network.
>
> Any ideas would be appreciated.

I searched around a bit because this is something that I want to do also. 
With iptables it can be done in the MANGLE table:

http://www.voip-info.org/wiki-Linux+Router

Look about half-way down the page at "Packet Mangling". This is good for 
me because I have my phone-adapter behind a Linux firewall. But I couldn't 
find anything specific to your router. But maybe some of the terminology 
can get you in the right direction in your router manual.

>
> Joe
> _______________________________________________
> nflug mailing list
> nflug at nflug.org
> http://www.nflug.org/mailman/listinfo/nflug
>
_______________________________________________
nflug mailing list
nflug at nflug.org
http://www.nflug.org/mailman/listinfo/nflug