[nflug] MythTV issues

Wed Mar 8 23:46:09 EST 2006

Well i did tha howto, but It did not change anything...

joshua at purgatory:~$ lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 
[KT133/KM133] (rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 
AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super 
South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 1a)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 1a)
0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] 
(rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. 
VT82C686 AC97 Audio Controller (rev 50)
0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0c.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 
100] (rev 08)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 
[GeForce4 MX 440 AGP 8x] (rev c1)
joshua at purgatory:~$

joshua at purgatory:~$ lspci -vvvv
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 
[KT133/KM133] (rev 03)
        Subsystem: Giga-byte Technology: Unknown device 0000
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 8
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: <available only to root>

0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 
AGP] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: dda00000-dfafffff
        Prefetchable memory behind bridge: cd800000-dd8fffff
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: <available only to root>

0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super 
South] (rev 40)
        Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: <available only to root>

0000:00:07.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 
(prog-if 8a [Master SecP PriP])
        Subsystem: VIA Technologies, Inc. 
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Region 4: I/O ports at ffa0 [size=16]
        Capabilities: <available only to root>

0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 1a) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin D routed to IRQ 11
        Region 4: I/O ports at cc00 [size=32]
        Capabilities: <available only to root>

0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 1a) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin D routed to IRQ 11
        Region 4: I/O ports at d000 [size=32]
        Capabilities: <available only to root>

0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] 
(rev 40)
        Subsystem: Giga-byte Technology: Unknown device 0000
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin ? routed to IRQ 9
        Capabilities: <available only to root>

0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. 
VT82C686 AC97 Audio Controller (rev 50)
        Subsystem: Giga-byte Technology: Unknown device a002
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 10
        Region 0: I/O ports at dc00 [size=256]
        Region 1: I/O ports at d800 [size=4]
        Region 2: I/O ports at d400 [size=4]
        Capabilities: <available only to root>

0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Addtron Technology Co, Inc.: Unknown device 1360
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at c800 [size=256]
        Region 1: Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>

0000:00:0c.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 
100] (rev 08)
        Subsystem: Intel Corp. EtherExpress PRO/100+ Management Adapter
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 
bytes)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at c400 [size=64]
        Region 2: Memory at dfe00000 (32-bit, non-prefetchable) [size=1M]
        Expansion ROM at dfd00000 [disabled] [size=1M]
        Capabilities: <available only to root>

0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 
[GeForce4 MX 440 AGP 8x] (rev c1) (prog-if 00 [VGA])
        Subsystem: Unknown device 3842:3088
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at dfae0000 [disabled] [size=128K]
        Capabilities: <available only to root>

joshua at purgatory:~$

Joshua Ronne Altemoos wrote:

> They have a nice ubuntu howto :) 
> http://ivtvdriver.org/index.php/Howto:Ubuntu
>
> Cyber Source wrote:
>
>> Joshua Ronne Altemoos wrote:
>>
>>> I don't know I just did what I was asked. I looked at rivatv and it 
>>> says the driver for my tuner is under development so I will have to 
>>> check back there again, but as CyberSource said, If lspci did not 
>>> show the tuner?
>>>
>>> ~Josh
>>>
>>> Mark T. Valites wrote:
>>>
>>>> On Wed, 8 Mar 2006, Joshua Ronne Altemoos wrote:
>>>>
>>>>> I can play ppracer, but I can not watch TV in xawtv. I sent the 
>>>>> lspci and
>>>>> my /etc/modules eariler.
>>>>
>>>>
>>>>
>>>>
>>>> The firsst result in a google/linux search for "EVGA geforce4 MX 
>>>> 440 phillips" turns up:
>>>>
>>>> http://rivatv.sourceforge.net/status.html
>>>>
>>>> Your modules.conf doesn't list the rivatv module - this is most 
>>>> likely what you need. I'm not sure if it's part of ubuntu (it's not 
>>>> found by apt in Debian here).
>>>>
>>>> Having tuxracer or any other opengl app working well doesn't really 
>>>> have anything to do with the tuner. You'll want to get the tuner 
>>>> working first with xawtv before throwing mythtv into the mix.
>>>> _______________________________________________
>>>> nflug mailing list
>>>> nflug at nflug.org
>>>> http://www.nflug.org/mailman/listinfo/nflug
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> nflug mailing list
>>> nflug at nflug.org
>>> http://www.nflug.org/mailman/listinfo/nflug
>>>
>> Ok, see the part where it said "Subsystem: Unknown device 3842:3088", 
>> a quick google on this found this--->
>> http://www.spinics.net/lists/vfl/msg07108.html . That mentions the 
>> saa* stuff, I seem to recall that this is covered by the ivtv 
>> modules. Check out http://ivtvdriver.org/index.php/Main_Page
>> _______________________________________________
>> nflug mailing list
>> nflug at nflug.org
>> http://www.nflug.org/mailman/listinfo/nflug
>
>
>
> _______________________________________________
> nflug mailing list
> nflug at nflug.org
> http://www.nflug.org/mailman/listinfo/nflug

_______________________________________________
nflug mailing list
nflug at nflug.org
http://www.nflug.org/mailman/listinfo/nflug