zip drive errors

Michael mpo1 at adelphia.net
Mon Jun 17 21:26:03 EDT 2002


   Hi all,    I had a little time so I tried  cfdisk /dev/hdd,  cfdisk /dev/hdd4,  cfdisk /dev/scd0, all of which got me a fatal error, press any key to return, and fdisk /dev/hdd, fdisk /dev/scd0 etc. etc. which resulted in unable to open disk. I don't have time right now to go into my boot config. file, I'm hoping to get to that tomorrow . Might I be doing something the wrong way?

Thank you,
Mike

  ----- Original Message ----- 
  From: Cyber Source 
  To: nflug at nflug.org 
  Sent: Monday, June 17, 2002 7:55 PM
  Subject: Re: zip drive errors


  also to use /dev/scd0, check to see if you have something like hdd=ide-scsi in your boot config, check your /etc/lilo.conf file, I add that all the time, then tell whatever my ide cd-rom drive is, that it is /dev/scd0, this is a nice workaround as Linux seems to work much better with scsi emulation and the supermount command lines in /etc/fstab don't have a problem with xmms then, it is a pretty neat little work around 
  On Mon, 2002-06-17 at 19:50, Justin Bennett wrote: 
yeah use a blank disk, or even put one in with stuff on it. Try ding a fdisk
/dev/hdd and see if you can see the partitions on them. If it's been used in
windows you should be able to see the partitions, maybe it's not on 4...


Michael wrote:

> Justin,   the disks I've been trying to read have info written on them from
> various windows sessions and are IBM formatted as per the label. I'm
> figuring that I should still be able to read them as I can read floppy disks
> that have been used in windows. I will try a blank disk and give
> fdisk/dev/hdd a shot when my wife is done using my machine for her work. As
> for creating a FAT partition on partition 4, do you mean the zip disk
> itself?
>
> Mike
>
> ----- Original Message -----
> From: "Justin Bennett" <justin.bennett at dynabrade.com>
> To: <nflug at nflug.org>
> Sent: Monday, June 17, 2002 7:04 PM
> Subject: Re: zip drive errors
>
> > No is should be hdd. I have in internal one also. The parrelel version
> uses scsi
> > emulation over the parralel (spelling) port, and appears as a scsi device.
> The
> > ATAPI ide ones appear as hddx.
> >
> > Justin
> >
> >
> > Michael Osika wrote:
> >
> > > Pete,  I have also read in other sources on the net ( Linux Gazette )
> that
> > > it should be a scsi device but I wasn't sure if this was right. I'm
> willing
> > > to give it a shot but how do I go about changing from hdd4 to sda4, and
> > > being new to Linux, being specific is again appreciated. :-)   I have
> played
> > > around with different tools but have not found a way to change things. I
> > > don't want to meddle too much when I'm not sure what consequences will
> be.
> > >
> > > Mike
> > >
> > > ----- Original Message -----
> > > From: "peter" <pvant67 at wnyip.net>
> > > To: <nflug at nflug.org>
> > > Sent: Monday, June 17, 2002 6:24 PM
> > > Subject: Re: zip drive errors
> > >
> > > > Mike: the zip drive should be /dev/sda4, since it's a scsi device
> > > > internally, regardless of the actual type of interface used. At least,
> > > > that's what it wes on my parallel port model. I bet it's the same on
> > > > yours. Either way, keep us posted
> > > > --
> > > > "Truly, if Te is strong in one, all one needs to do is sit on one's
> ass,
> > > > and the corpse of one's enemy shall be carried past shortly."
> > > > -- spotted somewhere on Usenet
> > > >
> > >
> > > --
> > > This message has been scanned for viruses and
> > > dangerous content by Dynabrade using Mailscanner,
> > > and is believed to be clean.
> >
>
> --
> This message has been scanned for viruses and
> dangerous content by Dynabrade using Mailscanner,
> and is believed to be clean.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.nflug.org/pipermail/nflug/attachments/20020618/44457a18/attachment-0001.html


More information about the nflug mailing list