Adding hardrive

[Riga, Anthony]

Yes it found the drive and I have my jumpers set. Its ide


-----Original Message-----
From:	Gregory J. Neumann [mailto:gjn at certainlywood.com]
Sent:	Fri 7/19/2002 6:46 PM
To:	nflug at nflug.org
Cc:	
Subject:	Re: Adding hardrive 
What kind of bus?  IDE or SCSI?  Do you have the jumpers set 
properly (Master/Slave/CS)?  Is the drive listed in the BIOS setup?  
The latest and greatest BIOS's with the "onboard IDE" controllers 
usually have the ability to enable/disable them in BIOS, and if the 
controller is turned off, RedHat will never find it.  Does your BIOS 
have an "auto-detect" feature?  If so, did it find the drive?
Whew! Ask a simple question and get 99 as a "helpful" reply! ;-)  
Hope some of this helps.

-Greg

> 
> I am logged on as root I do fdisk /dev/hdd then I get unable to open /dev/hdd. I want to add the hardrive for more space and I am using Redhat 7.3. Is there a config I have to do?





-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 2781 bytes
Desc: not available
Url : http://www.nflug.org/pipermail/nflug/attachments/20020720/d0ff3e2d/attachment-0001.bin