Athlon Motherboards

Cyber Source peter at thecybersource.com
Fri Aug 1 23:03:52 EDT 2003


Sounds good, 1 year parts and labor on individual sales, on total system
sales, 3 year parts AND labor warrany!
On Fri, 2003-08-01 at 18:51, Joshua wrote:

> i may call and get one of those for when i start building my pc
> 
> --------- Original Message --------
> From: nflug at nflug.org
> To: nflug at nflug.org <nflug at nflug.org>
> Subject: Re: Athlon Motherboards
> Date: 02/08/03 02:46
> 
> >
> >
> >
> >
> >
> >
> >
> > The older GeForce board will not work in an 8x AGP slot. Bob Meyer bought
> a new GeForce 8X AGP video card from me last week and he was lucky. See, the
> newer video boards will work in the older AGP slots on the older
> motherboards but not the other way around. The newer 8X AGP ports have an
> extra separator in the slot that your older video card does not have. So you
> would need a new video board for the newer motherboards with 8X AGP ports.
> > The onboard sound works fantastic with ALSA installed, and this is a
> standard ATX motherboard so specifically it has onboard, Sound, GamePort, 2
> serial, 1 parallel, 2 USB and PS/2 keyboard and mouse. It has 5 PCI slots
> and NO ISA slots. None of the newer boards have ISA slots anymore either.
> So, if you have any ISA cards, they would have to be replaced as well. So
> really all you would need is a new video board and ethernet card. 10/100 PCI
> NIC's are $15.00 and we have the NVIDIA GeForce2 MX400 64MB 8X AGP w/TV out
> video board for $59.00 of the NVIDIA GeForce4 MX440 64MB 8X AGP DDR w/TV out
> video board for $79.00. I am in Williamsville and by appointment only. If
> you want, call me tomorrow at 553-8525. Thanks
> > On Fri, 2003-08-01 at 21:06, David Mangani wrote:
> >
> >     Thanks for the advice. I have an older geforce 2 board, that I plan to
> use at least for now. I also have an almost new 20 gig 7200 rpm hdd I plan
> to reuse. As for sound, if the on board sound is good and it is supported,
> I'll save the slot for something else. Does the mainboard you mention have
> on board usb and or ethernet? Or should I use separate cards for those
> functions as Kevin suggested.
> >
> >     Thx again,
> >     Dave.
> >
> >     P.S. Where is your store? I'm in Clarence. Is it far for me?
> >
> >     Cyber Source wrote:
> >
> >         You will probably have a hard time finding a motherboard today
> without onboard sound but that's ok, if you install ALSA, they rock!&nbsp;
> Or, if you want to reuse your SBLive, you could just disable the onboard
> sound in the BIOS.
> >         I sell Gigabyte motherboards for AMD cpu's
> >         Gigabyte GA-7VA 8xAGP motherboard $109.00
> >
> >
> >         On Fri, 2003-08-01 at 18:14, David Mangani wrote:
> >
> > I'm considering doing a rebuild on my box. I intend to go with AMD
> > again. ( using a k6-2 now ) I want something that WILL work good with
> > Linux. I don't need every bell and whistle but would like ethernet, USB
> > 2.0 would be nice, sound can be there or not. I have a good SB live
> > card. Definately don't want on board video. Anyone have a suggestion on
> > a good board that won't break the bank. Would also like a newer board
> > that supports 333 or even 400mhz ddr. Once I decide on a main board I'll
> > see how much CPU I can afford. LOL
> >
> >
> > TIA
> > Dave
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --
> > Cyber Source &lt;peter at thecybersource.com&gt;
> >
> >
> >
> >
> >
> >
> >
> >

-- 
Cyber Source <peter at thecybersource.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.nflug.org/pipermail/nflug/attachments/20030802/c7565c76/attachment-0001.html


More information about the nflug mailing list