Win 2k Routes

Justin Bennett Justin.Bennett at dynabrade.com
Wed Sep 25 08:56:14 EDT 2002


ok that works....

Thanks!
Justin

Tom McKim said:
>
> Route ADD "data" -p
> Just type route at the cmd prompt.  It will tell you all the comands.
> Here they are below. ______________________
> C:\>route ?
> Manipulates network routing tables.
> ROUTE [-f] [-p] [command [destination]
>                   [MASK netmask]  [gateway] [METRIC metric]  [IF
> interface]
>   -f           Clears the routing tables of all gateway entries.  If
> this is
>                used in conjunction with one of the commands, the tables
> are cleared prior to running the command.
>   -p           When used with the ADD command, makes a route persistent
> across
>                boots of the system. By default, routes are not preserved
> when the system is restarted. Ignored for all other
> commands, which always affect the appropriate persistent
> routes. This option is not supported in Windows 95.
>   command      One of these:
>                  PRINT     Prints  a route
>                  ADD       Adds    a route
>                  DELETE    Deletes a route
>                  CHANGE    Modifies an existing route
>   destination  Specifies the host.
>   MASK         Specifies that the next parameter is the 'netmask' value.
> netmask      Specifies a subnet mask value for this route entry.
>                If not specified, it defaults to 255.255.255.255.
>   gateway      Specifies gateway.
>   interface    the interface number for the specified route.
>   METRIC       specifies the metric, ie. cost for the destination.
> All symbolic names used for destination are looked up in the network
> database file NETWORKS. The symbolic names for gateway are looked up in
> the host name database file HOSTS.
> If the command is PRINT or DELETE. Destination or gateway can be a
> wildcard, (wildcard is specified as a star '*'), or the gateway argument
> may be omitted. If Dest contains a * or ?, it is treated as a shell
> pattern, and only matching destination routes are printed. The '*'
> matches any string, and '?' matches any one char. Examples: 157.*.1,
> 157.*, 127.*, *224*. Diagnostic Notes:
>     Invalid MASK generates an error, that is when (DEST & MASK) != DEST.
> Example> route ADD 157.0.0.0 MASK 155.0.0.0 157.55.80.1 IF 1
>              The route addition failed: The specified mask parameter is
> invalid.
>  (Destination & Mask) != Destination.
> Examples:
>     > route PRINT
>     > route ADD 157.0.0.0 MASK 255.0.0.0  157.55.80.1 METRIC 3 IF 2
>              destination^      ^mask      ^gateway     metric^    ^
>                                                          Interface^
>       If IF is not given, it tries to find the best interface for a
> given gateway.
>     > route PRINT
>     > route PRINT 157*          .... Only prints those matching 157*
> route CHANGE 157.0.0.0 MASK 255.0.0.0 157.55.80.5 METRIC 2 IF 2
>       CHANGE is used to modify gateway and/or metric only.
>     > route PRINT
>     > route DELETE 157.0.0.0
>     > route PRINT
>
>
>  Justin Bennett wrote:This is not linux related but I need some help
> jogging my memory, Whats
> the file in W2k where you can add routes, so the routes will be active
> at startup. I did it before but can't remember.
>
>
>
> --
> -------------------------------------------
> Justin Bennett
> Red Hat (Linux) Certified Engineer
> Network Administrator
> Dynabrade Inc.
> 8989 Sheridan Dr
> Clarence, NY 14031
> 716-631-0100 ext 215
>
>
> Tom McKim
> mckimt at yahoo.com
> mckimt at epicforchildren.org
>
>
> ---------------------------------
> Do you Yahoo!?
> New DSL Internet Access from SBC & Yahoo!
> --
> This message has been scanned for viruses and
> dangerous content by Dynabrade using Mailscanner,
> and is believed to be clean.


-- 
-------------------------------------------
Justin Bennett
Red Hat (Linux) Certified Engineer
Network Administrator
Dynabrade Inc.
8989 Sheridan Dr
Clarence, NY 14031
716-631-0100 ext 215




More information about the nflug mailing list